Kia Cerato car check
Find out if a Cerato has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.
Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.
- MOT failure rate
- 28.1%21k tests
- Known problems
- 5across LD to TD
- Full report
- £7.49one-off, no subscription
Which Cerato are you looking at?
Each Cerato generation has its own weak spots. Pick the one you’re viewing to see what to check.
-
Subframe mounting point corrosion
Safety risk LD, TDThe load-bearing structure around subframe and suspension mounting points suffers from premature corrosion on this generation. MOT data shows this model fails at 18.2 times the national fleet average for structural defects in prescribed areas around suspension mountings. The issue affects the metal framework that transfers suspension loads to the main bodyshell. This is a safety-critical structural failure that can lead to suspension collapse.
What to check: Inspect the area around the front suspension strut tops from inside the engine bay - look for rust staining, flaking paint, or visible corrosion around the mounting points. Check the rear suspension mounting points from inside the boot or spare wheel well for similar corrosion patterns. Look unde...
-
Brake pipe corrosion
Safety risk LD, TDBrake pipes and hoses suffer from accelerated corrosion, with MOT failure rates 13.7 times higher than the fleet average for pipe corrosion and 27.6 times higher for hose ferrule corrosion. The brake lines are particularly vulnerable to salt corrosion where they run along the underside of the vehicle. Both steel brake pipes and the metal ferrules that connect flexible hoses deteriorate rapidly on this model.
What to check: Inspect all visible brake pipes running along the underside of the vehicle for rust, flaking, or thin sections where metal has corroded away. Check brake hose connections at each wheel for corrosion around the metal ferrule fittings - these should not be rusty or flaking. Look for any signs of br...
-
Power steering system failure
Wear item LD, TDThe hydraulic power steering system suffers from pump failure and fluid leaks at a rate 80.8 times higher than the national fleet average. The power steering pump develops internal seal failures, leading to fluid loss and complete steering assistance failure. This is particularly problematic on the 1.6 petrol variants where the pump is driven directly from the engine and operates under high pressure.
What to check: Check the power steering fluid reservoir level and colour - fluid should be clear or light amber, not black or milky. Inspect around the power steering pump (mounted on the engine block) for fluid leaks or wet areas. Look under the vehicle for power steering fluid drips - they appear as a reddish...
-
Suspension component corrosion
Wear item LD, TDSuspension components suffer from excessive corrosion damage at 21.9 times the national fleet average. The steel suspension arms, links, and mounting brackets corrode rapidly, particularly where they are exposed to road salt and spray. This affects both front and rear suspension components and can compromise vehicle handling and safety.
What to check: Inspect visible suspension components from the wheel wells for rust, flaking metal, or sections where corrosion has thinned the metal structure. Check anti-roll bar links and suspension arms for rust that has caused structural weakness. Look for orange rust staining around suspension mounting poi...
-
Suspension bush premature wear
Wear item LD, TDSuspension bushes and joints wear at 14.2 times the national fleet average, with dust covers failing at 32 times the average rate. The rubber bushes in suspension arms, anti-roll bar links, and subframe mounts deteriorate rapidly. Missing or split dust covers on ball joints and track rod ends allow contamination that accelerates wear of the internal components.
What to check: Inspect all visible rubber dust covers on ball joints, track rod ends, and CV joints for splits, tears, or missing sections. Check suspension bush conditions where visible - look for cracking, perishing, or bushes that have separated from their metal sleeves. Look under the vehicle at anti-roll b...
We haven’t flagged any common problems for this generation in our data yet. A history check still tells you about finance, write-offs and theft, and the MOT history shows how this particular car has been looked after.
Cerato MOT results
of Cerato MOT tests end in a fail, from 21,150 tests.
Most common reasons for failing
- Body panel damageBodywork
- Power steering faultSteering
- Anti-roll bar links wornSuspension
Check the Cerato you’re buying
One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.
Finance, stolen, write-off and owner history data provided by Experian.
What the check includes
- Outstanding finance Experian
- Write-off status Experian
- Stolen vehicle check Experian
- Previous owners and keeper history Experian
- MOT history and advisories DVSA
- Mileage check DVSA
- Known problems for its generation GetCarWise
- How many are left on the road DVLA
Cerato questions
Is the Kia Cerato reliable?
28.1% of Cerato models fail their MOT based on 21,150 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being subframe mounting point corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.
What are the main problems with a Kia Cerato?
The most serious known issues are subframe mounting point corrosion, brake pipe corrosion, power steering system failure. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Cerato has been written off or had insurance claims linked to these faults.
How do I check if a Kia Cerato has outstanding finance?
Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.
How do I check if a Kia Cerato has been written off?
Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Cerato has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.
Can I check a Kia Cerato for free?
You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.
What does a Kia Cerato fail its MOT on?
The most common MOT failure on the Cerato is body panel damage. 28.1% of Cerato models fail overall, based on 21,150 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.
More on the Cerato
Other Kia car checks
Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.