Home/Car check/Hyundai/Tucson

Hyundai Tucson car check

Find out if a Tucson has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£19,5025,804 at dealers
MOT failure rate
17.1%259k tests
Known problems
10across JM to TL
Full report
£7.49one-off, no subscription

Which Tucson are you looking at?

Each Tucson generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Parking brake failure

    Safety risk TL

    The electronic parking brake system on TL-generation Tucsons suffers from widespread failures across multiple components including the actuator motor, control module, and cable mechanism. MOT data shows this model fails parking brake tests at 95.7 times the national fleet average, with failures documented across all mileage ranges from 20,000 to 150,000+ miles. The system may fail to engage, disengage, or provide insufficient holding force. This represents the single most prevalent defect on this generation.

    What to check: Check the instrument cluster for any parking brake warning lights or messages when the ignition is switched on. Attempt to operate the parking brake switch - listen for motor operation from the rear wheels when engaging and disengaging. With the parking brake supposedly engaged, gently rock the c...

  2. Turbo failure

    Safety risk JM

    The D4EA 2.0 CRDi engine in JM-generation Tucsons experiences turbocharger failure, typically manifesting as bearing wear, actuator malfunction, or compressor wheel damage. This issue commonly occurs between 80,000-180,000 miles and can result from poor oil quality, blocked oil feed lines, or actuator control problems. Failure modes include complete loss of boost pressure, excessive smoke production, and in severe cases, catastrophic turbo seizure that can damage the engine.

    What to check: Remove the engine oil dipstick and examine for metallic particles or unusual discoloration that might indicate turbo bearing failure. Inspect the air intake pipework for oil contamination, which suggests turbo seal failure. Check for any obvious oil leaks around the turbo unit and its oil feed/re...

  3. DCT clutch issues

    Wear item TL

    The dual-clutch transmission (DCT) fitted to 1.6 T-GDi models suffers from premature clutch wear and juddering, particularly affecting urban driving conditions. The system uses two clutches alternating engagement for seamless shifts, but poor calibration and inadequate cooling leads to clutch slip and eventual failure. This issue is distinct from the broader DCT control problems but often occurs alongside them. Specialist clutch replacement typically costs £1,000-2,500.

    What to check: Check service history for DCT fluid changes - irregular maintenance accelerates clutch wear. Ask about any previous DCT software updates or warranty work. Look for any burning smell around the transmission area that might indicate overheated clutch material.

  4. DCT issues

    Wear item TL

    The dual-clutch transmission system experiences control module failures, software glitches, and hydraulic system problems beyond the physical clutch wear issues. Problems include hesitation during gear changes, sudden loss of drive engagement, and error codes relating to transmission control. NHTSA data shows significant complaint volumes regarding shifting problems and gear selection failures. This represents the broader DCT system reliability issues distinct from clutch wear alone.

    What to check: Check the instrument panel for any transmission warning lights or error messages when ignition is switched on. Request any diagnostic trouble codes from previous garage visits. Ask about the frequency of DCT adaptation resets or software updates.

  5. Injector failure

    Wear item JM

    The D4EA diesel engine suffers from fuel injector failures, typically caused by contamination in the fuel system or wear of the injector nozzles and seals. Failed injectors cause rough running, increased emissions, and poor fuel economy. This issue commonly affects vehicles between 80,000-180,000 miles and often requires replacement of multiple injectors simultaneously due to similar wear patterns across the engine.

    What to check: Check for any diesel smell around the engine bay indicating external fuel leaks from injector seals. Look for black staining around injector positions on the cylinder head. Request any previous diagnostic trouble codes relating to fuel injection or cylinder misfires.

  6. DPF issues

    Wear item TL

    Diesel particulate filter (DPF) blockage is a persistent issue on TL-generation diesel Tucsons, particularly affecting vehicles used for short urban journeys that prevent natural regeneration cycles. The DPF warning light illuminates when the filter becomes clogged, requiring forced regeneration or physical cleaning. Severely blocked filters require replacement at significant cost, and continued driving with DPF warnings can damage the turbocharger through excessive back-pressure.

    What to check: Check the instrument cluster for DPF warning lights or service messages when ignition is switched on. Ask about recent long drives or motorway journeys - DPF problems worsen with purely urban use. Check service history for previous DPF regeneration cycles or replacements.

  7. Dual mass flywheel

    Wear item TL

    The dual-mass flywheel (DMF) on diesel TL models experiences failure of the internal damping springs and friction surfaces, causing vibration through the drivetrain and noise during startup and shutdown. The DMF is designed to smooth diesel engine torque pulses but fails prematurely on this model, typically between 60,000-150,000 miles. DMF failure often coincides with clutch replacement as they share removal procedures.

    What to check: Listen carefully during engine startup and shutdown for metallic rattling or knocking sounds from the transmission bell-housing area. Check for excessive vibration felt through the gear lever or pedals when the engine is running. Ask about any recent clutch work as DMF problems often surface duri...

  8. Power steering failure

    Wear item JM, TL

    MOT data shows this model fails power steering tests at 86.1 times the national fleet average, with peak failure rates on 2.0-litre engines between 40,000-60,000 miles. The issue typically involves power steering pump failure, fluid leaks from the rack or high-pressure lines, or complete system malfunction. This represents one of the most statistically significant defects affecting the model across both generations.

    What to check: Check the power steering fluid reservoir level and condition - low fluid or contaminated fluid indicates system problems. Inspect around the power steering pump, rack, and connecting lines for any visible fluid leaks. Look for power steering fluid stains on the ground where the car has been parked.

  9. Carbon buildup

    Engine damage risk TL

    The 1.6 T-GDi direct injection engine suffers from carbon deposit accumulation on the intake valves, as fuel is injected directly into the cylinder rather than washing over the valves. This carbon buildup restricts airflow and causes power loss, rough idle, and increased fuel consumption. The issue affects all direct injection petrol engines but is particularly pronounced on this unit, typically requiring professional cleaning every 50,000-75,000 miles.

    What to check: Check service history for any previous carbon cleaning services or intake valve cleaning procedures. Ask about fuel consumption patterns - carbon buildup typically increases consumption noticeably. Request any diagnostic trouble codes relating to mixture or airflow issues.

  10. Emissions failure

    Engine damage risk TL

    The 1.6 T-GDi petrol engine shows emissions failures at This is likely related to the carbon buildup issues affecting GDi engines, where carbon deposits on intake valves and combustion chambers affect the air-fuel mixture and combustion efficiency, leading to elevated emissions that exceed MOT limits.

    What to check: Check service history for any recent emissions-related repairs or carbon cleaning services. Ask about recent fuel consumption patterns - emissions problems often correlate with increased consumption. Request any diagnostic trouble codes relating to lambda sensors, catalytic converters, or mixture...

What Tucsons cost at dealers now

From 5,804 used Tucsons we track on UK dealer websites.

Typical asking price
£19,502
Typical mileage
31,411 miles
Price change vs last month
-9.5%

Tucson MOT results

17.1%

of Tucson MOT tests end in a fail, from 259,204 tests.

Most common reasons for failing

  1. Parking brake inefficientBrakes
  2. Power steering faultSteering
  3. Parking brake efficiency less than 50% of the r...Brakes

Check the Tucson you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Tucson questions

Is the Hyundai Tucson reliable?

17.1% of Tucson models fail their MOT based on 259,204 tests analysed. That’s about average for the class. There are 10 known problems to watch for, the most serious being parking brake failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Hyundai Tucson?

The most serious known issues are parking brake failure, turbo failure, dct clutch issues. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Tucson has been written off or had insurance claims linked to these faults.

How do I check if a Hyundai Tucson has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Hyundai Tucson has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Tucson has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Hyundai Tucson for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Hyundai Tucson fail its MOT on?

The most common MOT failure on the Tucson is parking brake inefficient. 17.1% of Tucson models fail overall, based on 259,204 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Tucson

Other Hyundai car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.