Home/Car check/Hyundai/I40

Hyundai I40 car check

Find out if a Hyundai I40 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£6,11646 at dealers
MOT failure rate
20.5%67k tests
Known problems
9across VF
Full report
£7.49one-off, no subscription

Which I40 are you looking at?

Each I40 generation has its own weak spots. Here are the known problems.

  1. Steering rack free play excessive

    Safety risk VF

    The i40 steering rack develops excessive internal wear leading to dangerous free play at the steering wheel. MOT data shows this model fails at 27.8 times the fleet average for excessive steering wheel free play, with peak failure rates on the 1.6 petrol variant between 80,000-100,000 miles. The rack pinion or internal bushings wear prematurely, creating play that increases rapidly once started. This is a progressive fault that becomes a serious safety hazard as steering response becomes unpredictable.

    What to check: With the ignition off and wheels pointing straight ahead, grip the steering wheel at the 9 and 3 o'clock positions and attempt to rock it left and right without moving the front wheels. More than 25mm (1 inch) of movement at the wheel rim before the wheels start to turn indicates excessive play. ...

  2. DPF issues

    Wear item VF

    The diesel particulate filter on i40 diesel variants blocks frequently, particularly on cars used primarily for short urban journeys. The DPF requires regular high-temperature regeneration cycles that cannot complete if the exhaust system never reaches operating temperature. Warning lights appear when the filter reaches 70-80% capacity, but many owners ignore these until complete blockage occurs. The 1.7 CRDi engine is particularly affected due to its combustion characteristics and the relatively small DPF fitted.

    What to check: Check the dashboard for DPF warning lights - a coil symbol or specific DPF pictogram indicates regeneration is needed. Ask the seller about driving patterns - cars used only for short journeys under 10 miles are high risk. Request evidence of recent forced regenerations or DPF services. Look for ...

  3. Turbo failure

    Engine damage risk VF

    The turbocharger on i40 diesel engines fails due to oil starvation, carbon buildup, or bearing wear. DPF issues that cause back-pressure contribute to premature turbo failure as the turbine struggles against restricted exhaust flow. Poor oil change intervals and low-quality oil accelerate bearing wear. The variable geometry mechanism on the 1.7 CRDi is particularly sensitive to carbon deposits that prevent proper vane operation, leading to boost control problems and eventual mechanical failure.

    What to check: Check the oil level and condition on the dipstick - low oil or metallic contamination indicates bearing problems. Inspect around the turbo for oil leaks - accessible from above on the iLook for wet oil deposits on the turbo housing or surrounding components. Check the intercooler pipes for oil co...

  4. Dual mass flywheel failure

    Wear item VF

    The dual mass flywheel on i40 diesel variants fails due to internal spring breakage and damper wear. The DMF is designed to smooth diesel engine vibration but the internal springs fatigue over time, particularly on cars used for frequent stop-start driving or where the clutch has been slipped excessively. Failure typically occurs between 60,000-100,000 miles and requires clutch replacement at the same time as access requires gearbox removal.

    What to check: With the engine off, listen carefully as you turn the ignition key to the start position - a rattling or knocking noise for 2-3 seconds after engine shutdown indicates DMF spring failure. Check the clutch pedal feel - a spongy or inconsistent bite point can indicate DMF problems affecting clutch ...

  5. Universal joint wear

    Wear item VF

    The driveshaft universal joints on 1.7 diesel variants wear prematurely, with MOT data showing failure rates 13.8 times higher than the fleet average. The higher torque output of the diesel engine combined with the joint design causes accelerated wear of the needle bearings and seals. Failed joints create vibration through the drivetrain and can cause complete driveshaft separation if the joint collapses entirely.

    What to check: Jack up the front of the car safely and spin each wheel by hand while listening for clicking, grinding, or rough rotation that indicates joint wear. Grip the driveshaft near each CV joint and attempt to move it up and down - excessive play indicates worn joints or mountings.

  6. Steering ball joint wear

    Wear item VF

    Steering ball joints on the i40 wear prematurely, with MOT data showing failure rates up to 6.9 times higher than the fleet average. The ball joint design appears undersized for the vehicle weight and UK road conditions. Worn joints develop play that affects steering precision and can lead to joint separation. Both inner and outer track rod ends are affected, with the outer joints typically failing first due to exposure to road contamination.

    What to check: Jack up the front wheels safely and grip each wheel at 3 and 9 o'clock positions, then attempt to rock it horizontally - play in this plane indicates ball joint wear. Have someone turn the steering wheel left and right while you watch the steering linkage for any visible play or loose components....

  7. Carbon buildup on intake valves

    Engine damage risk VF

    The 1.6 GDI petrol engine uses direct injection which prevents fuel from washing the intake valves clean of oil vapour and combustion deposits. Carbon buildup accumulates on the valve stems and seats, reducing airflow and causing rough idle, power loss, and increased emissions. This affects all GDI engines but is particularly noticeable on the i40 due to the engine's combustion chamber design and PCV system characteristics.

  8. Steering column bearing wear

    Wear item VF

    The upper steering column bearing on 1.7 diesel variants develops excessive wear, showing MOT failure rates 8.9 times higher than the fleet average. The bearing that supports the top of the steering column shaft wears due to road vibration transmitted through the steering system. This creates play between the steering wheel and column shaft, affecting steering feel and potentially causing noise when turning.

    What to check: With the ignition off and steering unlocked, grip the steering wheel firmly and attempt to lift it vertically - excessive play or movement indicates upper bearing wear. Turn the wheel slowly from lock to lock while feeling for rough spots, binding, or play in the column mechanism. Check for any v...

  9. Brake disc warping

    Safety and MOT risk VF

    Front brake discs on the i40 warp prematurely, particularly on the 1.6 petrol variant which shows MOT failure rates 6.5 times higher than average for brake effort fluctuation. The disc material and design appear susceptible to thermal distortion from repeated heating and cooling cycles. Warped discs create pulsation through the brake pedal and steering wheel during braking, reducing braking efficiency and causing uneven pad wear.

    What to check: Inspect the brake discs through the wheel spokes for obvious scoring, grooving, or blue discoloration indicating overheating. Check disc thickness variation by running your finger around the friction surface - warped discs show noticeable high and low spots. Look for uneven pad wear patterns visi...

What I40s cost at dealers now

From 46 used I40s we track on UK dealer websites.

Typical asking price
£6,116
Typical mileage
79,828 miles
Price change vs last month
+3.7%

I40 MOT results

20.5%

of I40 MOT tests end in a fail, from 67,403 tests.

Most common reasons for failing

  1. Attachment of steering column defectiveSteering
  2. Tyre wear or damageTyres
  3. Light unit faultLights & Electrics

Check the I40 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

I40 questions

Is the Hyundai I40 reliable?

20.5% of I40 models fail their MOT based on 67,403 tests analysed. That’s about average for the class. There are 9 known problems to watch for, the most serious being steering rack free play excessive. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Hyundai I40?

The most serious known issues are steering rack free play excessive, dpf issues, turbo failure. Our car check flags whether a specific I40 has been written off or had insurance claims linked to these faults.

How do I check if a Hyundai I40 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Hyundai I40 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N I40 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Hyundai I40 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Hyundai I40 fail its MOT on?

The most common MOT failure on the I40 is attachment of steering column defective. 20.5% of I40 models fail overall, based on 67,403 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the I40

Other Hyundai car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.