Home/Car check/Ford/Puma

Ford Puma car check

Find out if a Puma has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£16,3065,782 at dealers
MOT failure rate
30.3%101k tests
Known problems
5across EC
Full report
£7.49one-off, no subscription

Which Puma are you looking at?

Each Puma generation has its own weak spots. Here are the known problems.

  1. Brake hose deterioration and ferrule corrosion

    Safety risk EC

    Ford Puma brake hoses show severe deterioration rates significantly exceeding the national fleet average, with flexible hoses becoming excessively damaged, chafed, twisted or stretched. The ferrules (metal end fittings) suffer accelerated corrosion that weakens the connection between rigid and flexible brake lines. This appears to affect all engine variants and becomes critical as early as 20,000 miles. The issue represents a fundamental brake system safety concern unique to this model.

    What to check: Inspect all four brake hoses where they connect to the brake calipers and the rigid brake lines on the chassis. Look for any cracking, bulging, or weeping of brake fluid along the hose length. Check the metal ferrules (end fittings) for rust, corrosion, or green copper-coloured deposits that indi...

  2. Subframe and mounting point corrosion

    Safety risk EC

    The Ford Puma suffers from severe structural corrosion affecting the subframe and critical mounting points for suspension components. MOT data shows failure rates up to 76 times the national average for body corrosion at mounting points, with additional failures for load-bearing structure weakness within 30cm of suspension mountings. This affects the fundamental structural integrity of the chassis and can progress to the point where vehicle control is adversely affected.

    What to check: Inspect the front subframe from underneath, looking for rust perforation, flaking metal, or areas where the metal appears thin or cracked. Pay particular attention to the areas around suspension arm mounting points. Check the rear beam axle mounting points to the body shell for similar corrosion ...

  3. Suspension bush and joint wear

    Wear item EC

    Ford Puma suspension components show accelerated wear rates with MOT failures 45 times higher than the national fleet average for worn pins, bushes, and joints. The issue affects both front and rear suspension systems across all engine variants. Premature bush deterioration is likely linked to the structural corrosion issues that compromise mounting point rigidity, creating additional stress on rubber components.

    What to check: Inspect all visible rubber bushes around suspension arms, anti-roll bar links, and rear beam mounts for cracking, splitting, or perishing. Check for excessive play by attempting to move suspension arms by hand with the wheel off the ground. Look for black rubber dust or debris around bush locatio...

  4. General body structure corrosion

    Safety and MOT risk EC

    Beyond the critical subframe issues, Ford Pumas suffer from widespread body structure corrosion that affects the overall rigidity of the vehicle assembly. This is separate from cosmetic rust and represents a fundamental structural integrity concern.

    What to check: Inspect the sill areas along both sides of the car for rust bubbling, perforation, or previous repair evidence. Check around wheel arch areas, particularly where the arch meets the sill, for rust breakthrough. Examine door frames and A-pillar bases for corrosion that could affect structural stren...

  5. Power steering system deterioration

    Wear item EC

    The 1.7-litre Puma variants with power steering show elevated failure rates for power steering pipes, hoses, and associated components. MOT data indicates failure rates 30 times higher than the fleet average, typically manifesting as corroded or damaged pressure lines between the pump and steering rack. This appears specific to the power-assisted steering system fitted to higher-specification models.

    What to check: Check power steering fluid level in the reservoir (usually located near the brake master cylinder). Low fluid levels indicate a leak somewhere in the system. Inspect visible power steering hoses for signs of weeping, cracking, or corrosion at the metal fittings. Look under the car for power steer...

What Pumas cost at dealers now

From 5,782 used Pumas we track on UK dealer websites.

Typical asking price
£16,306
Typical mileage
21,946 miles
Price change vs last month
-1.4%

Puma MOT results

30.3%

of Puma MOT tests end in a fail, from 100,760 tests.

Most common reasons for failing

  1. Body, cab or chassis corroded at a mounting pointBodywork
  2. Subframe bushes or mounts wornSuspension
  3. Floor deteriorated or insecureBodywork

Check the Puma you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Puma questions

Is the Ford Puma reliable?

30.3% of Puma models fail their MOT based on 100,760 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being brake hose deterioration and ferrule corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Ford Puma?

The most serious known issues are brake hose deterioration and ferrule corrosion, subframe and mounting point corrosion, suspension bush and joint wear. Our car check flags whether a specific Puma has been written off or had insurance claims linked to these faults.

How do I check if a Ford Puma has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Ford Puma has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Puma has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Ford Puma for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Ford Puma fail its MOT on?

The most common MOT failure on the Puma is body, cab or chassis corroded at a mounting point. 30.3% of Puma models fail overall, based on 100,760 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Puma

Other Ford car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.