Home/Car check/Ford/Fiesta

Ford Fiesta car check

Find out if a Fiesta has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£9,6455,799 at dealers
MOT failure rate
24.5%6.9m tests
Known problems
10across Mk7 to Mk6
Full report
£7.49one-off, no subscription

Which Fiesta are you looking at?

Each Fiesta generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Cylinder head cracking (fire risk)

    Safety risk Mk7

    1.6 EcoBoost ST models built between 2 June 2010 and 20 December 2014 suffer from cylinder head cracking that allows engine oil to leak onto the hot exhaust manifold, creating a significant fire risk. The crack typically occurs between the oil gallery and exhaust port, causing oil to seep externally rather than into the cooling system. Ford issued TSB 14B13 acknowledging this safety-critical defect.

    What to check: Inspect the cylinder head area for any signs of oil staining or residue, particularly around the exhaust manifold mounting points. Look for any signs of previous oil burning or heat discolouration on nearby components. Check service records for any mentions of oil leaks or cylinder head work. Ver...

  2. Head gasket failure

    Safety risk Mk8

    Early production 1.5 EcoBoost engines suffer premature head gasket failure due to inadequate cylinder head bolt torque specification and thermal cycling stress. The three-cylinder engine runs hotter and with higher specific output than previous Ford engines, causing head gasket material degradation and coolant loss into the combustion chambers. This issue predominantly affects 2017-2019 production cars and can lead to complete engine failure if coolant loss causes overheating.

    What to check: Check coolant reservoir level with engine cold - look for unexplained coolant loss without visible external leaks. Remove oil filler cap and inspect for mayonnaise-like emulsion on the underside - this indicates coolant mixing with oil. Look for white crystalline deposits around the expansion tan...

  3. Coolant system failure (nylon pipe)

    Safety risk Mk7

    Early 1.0 EcoBoost engines (2012-2016) used nylon coolant pipes that become brittle and fail suddenly, causing complete coolant loss and immediate overheating. The failure provides no warning - the pipe splits and dumps the entire cooling system contents within seconds. This is particularly critical on EcoBoost engines which run high compression ratios and generate significant heat. Later production models use improved rubber hoses.

    What to check: Inspect all visible coolant hoses and connections around the engine bay for any white or blue crusty deposits indicating previous coolant leaks. Check the coolant expansion tank level - it should be between min/max marks when cold. Look for any obvious coolant staining on the ground where the car...

  4. Powershift automatic transmission failure

    Safety risk Mk7

    The dual-clutch Powershift automatic transmission fitted to 2011-2015 Fiestas has a catastrophic failure rate due to premature clutch wear and control module faults. The transmission shudders, hesitates, and can lose drive entirely without warning. Ford faced multiple class-action lawsuits in the US over this transmission. UK specialists universally recommend avoiding Powershift-equipped Fiestas as the repair costs often exceed the vehicle's value.

    What to check: Check if the vehicle has a Powershift automatic transmission - identifiable by the gear selector having a manual mode with + and - positions. Ask about any previous transmission repairs, software updates, or clutch replacements. Request full service history showing regular transmission fluid chan...

  5. Wet belt degradation and engine seizure

    Safety risk Mk7

    The 1.0 EcoBoost uses an oil-immersed timing belt instead of a traditional chain. This rubber belt operates in the engine oil and degrades prematurely, shedding debris that clogs the oil pump pickup screen. Once clogged, oil pressure drops catastrophically and the engine seizes without warning. This is the single most destructive fault on Mk7 Fiestas with 1.0 EcoBoost engines, typically occurring between 40,000-100,000 miles regardless of service history.

    What to check: Pull the dipstick and examine the oil in bright light. Look for any black rubber particles or debris suspended in the oil - this indicates belt degradation is occurring. Ask for complete service history showing oil changes every 6,000 miles maximum - longer intervals accelerate belt degradation. ...

  6. Subframe corrosion and structural weakening

    Safety risk Mk7, Mk6

    MOT data shows Mk7 Fiestas fail at 24019.8x the national fleet average for load-bearing structure corrosion within 30cm of suspension mounting points. This affects the rear subframe and suspension mounting areas where corrosion weakens the structural integrity. The problem is particularly severe on cars exposed to road salt and affects vehicle safety if left unrepaired.

    What to check: Inspect the rear subframe area underneath the car for any visible rust, corrosion, or structural damage around suspension mounting points. Look for any previous welding repairs or patches that might indicate ongoing corrosion issues. Check for rust perforation or weakening of metal around the rea...

  7. Wet belt failure

    Safety risk Mk8

    The 1.0 EcoBoost uses an oil-bathed timing belt (wet belt) instead of a conventional timing chain to drive the camshafts and oil pump. This rubber belt deteriorates in the oil environment, shedding particles that contaminate the lubrication system and eventually cause complete belt failure. When the wet belt snaps, the interference engine suffers catastrophic valve and piston damage requiring complete engine replacement. Ford issued TSB 21B03 acknowledging the issue but many engines fail before the inspection mileage is reached.

    What to check: Remove the oil filler cap and inspect for black rubber particles or debris floating in the oil - this indicates active wet belt degradation. Check the oil on the dipstick for metallic particles or unusual thickness that could indicate belt contamination. Request service history showing oil change...

  8. Structural corrosion

    Safety risk Mk8

    MOT data shows Mk8 Fiestas fail structural integrity tests at 24019.8 times the national fleet average, with subframe mounting point corrosion being the primary concern. The lightweight construction uses thinner steel sections that are vulnerable to corrosion around suspension mounting points and load-bearing areas. This affects vehicle safety and structural integrity, making the car dangerous to drive when advanced. The issue appears across all engine variants and is worsening year-on-year in MOT statistics.

    What to check: Inspect underneath the car around the front subframe mounting points for rust perforation or structural weakness - look particularly at the areas within 30cm of spring and suspension component mounts. Check rear suspension mounting points on the bodyshell for corrosion or cracking. Examine sill a...

  9. DPF and EGR issues

    Wear item Mk7

    Diesel Fiesta models suffer from DPF (Diesel Particulate Filter) blockages and EGR (Exhaust Gas Recirculation) valve carbon buildup, particularly when used for short urban journeys. The DPF cannot complete passive regeneration cycles, leading to warning lights, limp mode, and eventual complete blockage. EGR valves stick due to carbon deposits, causing rough idling and poor performance.

    What to check: Ask about the previous owner's driving patterns - predominantly short urban journeys indicate high risk of DPF problems. Check for any DPF warning lights or messages in the instrument cluster. Look for excessive black sooting around the exhaust tip indicating incomplete combustion or regeneration...

  10. DPF issues

    Wear item Mk6

    The diesel particulate filter (DPF) becomes blocked with soot in cars used primarily for short urban journeys. The DPF requires regular high-temperature regeneration cycles that only occur during sustained motorway driving. When blocked, the car enters limp mode and displays warning lights. This affects all Mk6 diesel variants but is most problematic on cars with predominantly urban use patterns.

    What to check: Ask the seller about their typical driving pattern - cars used mainly for school runs and shopping trips are at highest risk. Check for any DPF or engine management warning lights on the dashboard when the ignition is turned on. Ask when the DPF warning light last illuminated and what action was ...

What Fiestas cost at dealers now

From 5,799 used Fiestas we track on UK dealer websites.

Typical asking price
£9,645
Typical mileage
42,179 miles
Price change vs last month
-10.1%

Fiesta MOT results

24.5%

of Fiesta MOT tests end in a fail, from 6,877,645 tests.

Most common reasons for failing

  1. Emissions failureExhaust & Emissions
  2. Light unit faultLights & Electrics
  3. Brake hoses perished or damagedBrakes

Check the Fiesta you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Fiesta questions

Is the Ford Fiesta reliable?

24.5% of Fiesta models fail their MOT based on 6,877,645 tests analysed. That’s about average for the class. There are 10 known problems to watch for, the most serious being cylinder head cracking (fire risk). A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Ford Fiesta?

The most serious known issues are cylinder head cracking (fire risk), head gasket failure, coolant system failure (nylon pipe). Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Fiesta has been written off or had insurance claims linked to these faults.

How do I check if a Ford Fiesta has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Ford Fiesta has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Fiesta has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Ford Fiesta for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Ford Fiesta fail its MOT on?

The most common MOT failure on the Fiesta is emissions failure. 24.5% of Fiesta models fail overall, based on 6,877,645 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Fiesta

Other Ford car checks

People also check

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.