Dodge Caliber car check
Find out if a Caliber has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.
Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.
- MOT failure rate
- 33.1%16k tests
- Known problems
- 5across PM
- Full report
- £7.49one-off, no subscription
Which Caliber are you looking at?
Each Caliber generation has its own weak spots. Here are the known problems.
-
Subframe mounting point corrosion
Safety risk PMThe Caliber suffers from severe corrosion at subframe and suspension mounting points, particularly around the rear subframe where it attaches to the body shell. This is a fundamental structural weakness that compromises vehicle safety. MOT data shows this model fails at 11.4 times the fleet average for load-bearing structure failure around suspension mounting points, with the problem worsening year-on-year across all variants.
What to check: Inspect the rear wheel arches from inside the boot area, looking for rust staining, flaky paint, or visible corrosion around where the subframe bolts to the body. Check under the rear bumper area for excessive corrosion or rust perforation around the subframe mounting points. Look for previous we...
-
Front suspension component wear
Wear item PMThe Caliber exhibits exceptionally high rates of front suspension wear, particularly bushes, ball joints, and associated components. MOT data shows this model fails at 215.7 times the fleet average for suspension pin, bush, or joint wear, with the 2.0-litre petrol variant worst affected between 40,000-60,000 miles. This represents one of the highest failure rates in the MOT database for any defect category.
What to check: Inspect the front wheel wells for excessive play in the suspension arms by pushing and pulling on the wheel with hands at 3 and 9 o'clock positions while the car is on the ground. Look for torn or perished rubber boots around ball joints and track rod ends. Check for uneven tyre wear patterns on ...
-
Front ball joint wear
Wear item PMBall joint wear is a specific and severe problem on the Caliber, with MOT data showing failures at 11.8 times the fleet average. The front ball joints are particularly prone to premature wear and play development, often requiring replacement well before 100,000 miles. This is in addition to the general suspension component issues affecting the model.
What to check: Jack up the front of the car and support on axle stands. Grasp the wheel at 12 and 6 o'clock and attempt to rock it vertically - excessive movement indicates ball joint wear. With the wheel still supported, grasp at 3 and 9 o'clock and rock horizontally to check for lateral play. Inspect the ball...
-
Brake hose ferrule corrosion
Safety and MOT risk PMThe Caliber suffers from premature corrosion of brake hose ferrules - the metal end fittings where flexible brake hoses connect to brake calipers and brake lines. MOT data shows failures at 15.9 times the fleet average, affecting all engine variants. This is a safety-critical defect that can lead to brake fluid leaks and brake failure.
What to check: Inspect all brake hose end fittings at each wheel, looking for rust, corrosion, or green copper-coloured deposits around the ferrule connections. Check for any signs of brake fluid weeping or staining around the hose connections. Look for swelling or deterioration of the rubber brake hoses themse...
-
Electronic Stability Control system malfunction
Wear item PMThe diesel Caliber variants show a specific pattern of Electronic Stability Control (ESC) system faults, with MOT data indicating failures at 17.4 times the fleet average in the 80,000-100,000 mile range. This typically manifests as a persistent ESC warning light and may relate to wheel speed sensor or ABS module issues.
What to check: Check the instrument cluster for illuminated ESC, ABS, or traction control warning lights. These may be amber or red depending on the fault severity. Look for any obvious damage to wheel speed sensors or their wiring looms near each wheel. Check that all tyres are of similar size and wear pattern...
We haven’t flagged any common problems for this generation in our data yet. A history check still tells you about finance, write-offs and theft, and the MOT history shows how this particular car has been looked after.
Caliber MOT results
of Caliber MOT tests end in a fail, from 16,304 tests.
Most common reasons for failing
- Suspension ball joints wornSuspension
- Seat mounting faultSeatbelts & Airbags
- ABS faultBrakes
Check the Caliber you’re buying
One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.
Finance, stolen, write-off and owner history data provided by Experian.
What the check includes
- Outstanding finance Experian
- Write-off status Experian
- Stolen vehicle check Experian
- Previous owners and keeper history Experian
- MOT history and advisories DVSA
- Mileage check DVSA
- Known problems for its generation GetCarWise
- How many are left on the road DVLA
Caliber questions
Is the Dodge Caliber reliable?
33.1% of Caliber models fail their MOT based on 16,304 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being subframe mounting point corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.
What are the main problems with a Dodge Caliber?
The most serious known issues are subframe mounting point corrosion, front suspension component wear, front ball joint wear. Our car check flags whether a specific Caliber has been written off or had insurance claims linked to these faults.
How do I check if a Dodge Caliber has outstanding finance?
Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.
How do I check if a Dodge Caliber has been written off?
Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Caliber has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.
Can I check a Dodge Caliber for free?
You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.
What does a Dodge Caliber fail its MOT on?
The most common MOT failure on the Caliber is suspension ball joints worn. 33.1% of Caliber models fail overall, based on 16,304 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.
More on the Caliber
Other Dodge car checks
Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.