Vauxhall Signum car check
Find out if a Signum has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.
Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.
- MOT failure rate
- 30.2%58k tests
- Known problems
- 5across Gen1
- Full report
- £7.49one-off, no subscription
Which Signum are you looking at?
Each Signum generation has its own weak spots. Here are the known problems.
-
Brake hose ferrule corrosion
Safety and MOT risk Gen1The brake hose ferrules (metal crimped connectors where flexible brake hoses connect to hard brake lines) suffer from accelerated corrosion on the Signum. MOT data shows this model fails at 10.6x the fleet average rate for this defect, with failures occurring from 60,000 miles onwards. The ferrules are exposed to road salt and moisture without adequate protection, leading to structural weakness that can cause brake hose separation. This affects all engine variants and represents a significant safety risk requiring immediate attention.
What to check: Inspect all four brake hose connection points at each wheel where the flexible hose meets the solid brake line. Look for rust, flaking metal, or white/green corrosion deposits around the crimped ferrule. Check for any weeping brake fluid around these connection points - even small droplets indica...
-
Brake pipe corrosion
Safety and MOT risk Gen1The steel brake pipes on the Signum suffer from accelerated corrosion, particularly where they run along the underbody and around the rear axle area. MOT data shows this model fails at 3.3x the fleet average rate for brake pipe damage and corrosion, affecting all engine variants from 60,000 miles onwards. The combination of poor corrosion protection and exposure to road salt creates multiple failure points in the brake hydraulic system.
What to check: Inspect all visible brake pipes running along the underbody, looking for rust, flaking metal, or pin-hole leaks. Pay particular attention to pipe clips and mounting points where corrosion accelerates. Check around the rear axle area where brake pipes are most exposed to road spray. Look for brake...
-
Suspension component corrosion and damage
Wear item Gen1Suspension components on the Signum suffer from excessive corrosion and structural damage, particularly affecting the 1.9-litre diesel variant. MOT data shows this model fails at 9.4x the fleet average rate for suspension component damage, with failures concentrated in higher mileage ranges from 100,000 miles onwards. The combination of the car's weight, inadequate corrosion protection on suspension arms, and exposure to road salt creates multiple failure points in the suspension geometry.
What to check: Inspect all visible suspension arms, subframe components, and mounting points for rust, cracking, or structural damage. Look particularly at lower wishbone arms and anti-roll bar mounting points. Check for excessive corrosion around suspension component attachment points to the bodyshell. Look fo...
-
Exhaust system corrosion and mounting failure
Wear item Gen1The exhaust system on the Signum suffers from accelerated corrosion and mounting point failure. MOT data shows this model fails at 14.0x the fleet average rate for exhaust leaks and insecurity, with the 2.2-litre petrol variant particularly affected from 60,000 miles onwards. The combination of the car's length, low ground clearance, and inadequate corrosion protection on exhaust brackets creates multiple failure points. All engine variants are affected across higher mileage ranges.
What to check: Visually inspect the entire exhaust system from underneath, looking for rust holes, cracked joints, or hanging sections. Pay attention to mounting brackets and rubber hangers. Check exhaust mounting points on the underbody for corrosion that could allow the exhaust to drop. Look for black soot de...
-
Suspension bush and joint wear
Wear item Gen1Suspension bushes and joints on the Signum wear at an accelerated rate compared to the national fleet average. MOT data shows this model fails at 5.0x the fleet average rate for suspension pin, bush, or joint wear, with the 1.9-litre diesel variant particularly affected from 60,000 miles onwards. The combination of the car's weight distribution and suspension design places higher loads on bushes and ball joints than typical family cars.
What to check: Inspect visible suspension bush rubber for cracking, splitting, or obvious deterioration. Look particularly at anti-roll bar drop link bushes and lower arm bushes. Check ball joint dust covers for splits that allow dirt ingress and accelerate wear. Look for oil or grease leakage from ball joints ...
We haven’t flagged any common problems for this generation in our data yet. A history check still tells you about finance, write-offs and theft, and the MOT history shows how this particular car has been looked after.
Signum MOT results
of Signum MOT tests end in a fail, from 58,345 tests.
Most common reasons for failing
- Emissions failureExhaust & Emissions
- Exhaust system damageBodywork
- Brake hoses perished or damagedBrakes
Check the Signum you’re buying
One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.
Finance, stolen, write-off and owner history data provided by Experian.
What the check includes
- Outstanding finance Experian
- Write-off status Experian
- Stolen vehicle check Experian
- Previous owners and keeper history Experian
- MOT history and advisories DVSA
- Mileage check DVSA
- Known problems for its generation GetCarWise
- How many are left on the road DVLA
Signum questions
Is the Vauxhall Signum reliable?
30.2% of Signum models fail their MOT based on 58,345 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being brake hose ferrule corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.
What are the main problems with a Vauxhall Signum?
The most serious known issues are brake hose ferrule corrosion, brake pipe corrosion, suspension component corrosion and damage. Our car check flags whether a specific Signum has been written off or had insurance claims linked to these faults.
How do I check if a Vauxhall Signum has outstanding finance?
Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.
How do I check if a Vauxhall Signum has been written off?
Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Signum has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.
Can I check a Vauxhall Signum for free?
You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.
What does a Vauxhall Signum fail its MOT on?
The most common MOT failure on the Signum is emissions failure. 30.2% of Signum models fail overall, based on 58,345 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.
More on the Signum
Other Vauxhall car checks
Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.