Home/Car check/Vauxhall/Insignia

Vauxhall Insignia car check

Find out if a Insignia has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£6,728380 at dealers
MOT failure rate
22.1%796k tests
Known problems
10across Mk1 to A
Full report
£7.49one-off, no subscription

Which Insignia are you looking at?

Each Insignia generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. EGR valve failure

    Engine damage risk Mk1

    The exhaust gas recirculation (EGR) valve recirculates exhaust gases back into the combustion chamber to reduce NOx emissions. Carbon buildup from diesel combustion gradually blocks the valve and its associated pipework, preventing proper operation. This causes loss of power, rough idling, and can trigger engine management warnings. The issue is exacerbated by short journey patterns that prevent the EGR system reaching optimal operating temperature.

    What to check: Check if any engine management lights are illuminated on the dashboard. Ask about recent loss of power, particularly noticeable during acceleration or when climbing hills. Look for excessive black smoke from the exhaust when the engine was last running.

  2. Timing chain wear

    Engine damage risk VXR

    The A28NET V6 turbo engine uses a timing chain system with hydraulic tensioners that can lose effectiveness over time, allowing chain slack to develop. This is accelerated by extended oil change intervals and the high stresses from turbocharging. Chain stretch affects valve timing precision, reducing performance and potentially causing valve-to-piston contact if the chain jumps teeth. This engine is particularly sensitive to oil quality and change frequency.

    What to check: Check the oil level and condition on the dipstick - low oil level accelerates chain wear. Ask about oil change history - intervals longer than 10,000 miles increase chain wear risk. Request any recent engine management diagnostics that might show timing-related fault codes.

  3. Timing chain issues

    Engine damage risk A

    Second generation Insignia turbo engines continue to suffer from timing chain stretch, particularly the A20NFT/A20NHT 2.0 turbo units. The hydraulic chain tensioners lose effectiveness over extended service, allowing chain slack that affects valve timing. This issue appears to be worse on engines with extended oil change intervals or where lower specification oil has been used. Chain wear is progressive and can eventually lead to engine damage if the chain jumps teeth.

    What to check: Check oil level and condition - timing chains are sensitive to oil starvation and contamination. Ask about oil change frequency - chains deteriorate faster with extended intervals beyond 10,000 miles. Request any diagnostic scans for timing-related fault codes or cam correlation errors.

  4. Turbo failure

    Engine damage risk A

    The turbochargers fitted to A generation petrol engines are prone to bearing wear and actuator failures. Oil contamination from extended service intervals accelerates bearing wear, while the electronic actuators that control boost pressure can fail due to carbon buildup or electrical faults. Symptoms include loss of boost pressure, excessive smoke from the exhaust, and whistling noises. These turbochargers operate at high temperatures and rely on clean oil for bearing lubrication.

    What to check: Check the oil level and condition - turbo bearings are highly sensitive to oil starvation and contamination. Look for oil residue around the turbo housing or air intake pipes indicating internal oil leaks. Ask about any recent loss of power, excessive exhaust smoke, or unusual whistling noises.

  5. Dual mass flywheel failure

    Wear item A

    The dual mass flywheel on A generation diesel engines suffers from the same fundamental issue as the earlier Mk1 - spring weakening over time due to diesel engine torque characteristics. The DMF consists of two masses connected by springs that absorb diesel combustion pulses, but these springs gradually lose their effectiveness. This results in increasing vibration through the drivetrain, particularly noticeable at idle and during gear changes. The issue persists across generations due to the inherent design limitations of dual mass flywheels with high-torque diesel engines.

    What to check: Ask about vibration felt through the gear lever, steering wheel, or seat, particularly when idling in gear with the clutch pedal up. Check service history for any previous clutch or DMF work - early failure may indicate driving style or mechanical issues. Ask if the car has been used primarily fo...

  6. DPF issues

    Wear item A

    The diesel particulate filter (DPF) on A generation diesels captures soot particles from the exhaust and burns them off during regeneration cycles. Cars used primarily for short journeys prevent the DPF reaching the temperature required for passive regeneration, causing soot buildup and eventual blockage. The ECU triggers active regeneration attempts, but if these fail repeatedly, the DPF warning light illuminates and the car enters limp mode to prevent engine damage.

    What to check: Check if the DPF warning light is illuminated on the dashboard - this indicates the filter requires immediate regeneration. Ask about recent driving patterns - cars used mainly for short journeys are more prone to DPF problems. Request service history showing any previous DPF cleaning or replacem...

  7. EGR cooler failure

    Engine damage risk A

    The EGR cooler on A generation diesels uses engine coolant to cool exhaust gases before they are recirculated back into the combustion chamber. The cooler's internal passages can crack due to thermal cycling, allowing coolant to leak into the exhaust system or intake manifold. This presents as coolant loss without external leaks, white smoke from the exhaust, or coolant contamination. EGR cooler failure is more common on engines that have suffered cooling system neglect or have been run with incorrect coolant specifications.

    What to check: Check the coolant reservoir level and look for signs of recent top-ups or staining around the filler cap. Look at the coolant condition - milky or contaminated coolant can indicate EGR cooler internal leakage. Ask about any recent coolant loss that cannot be explained by external leaks.

  8. Power steering system failure

    Wear item Mk1

    The 1.8 petrol engine in Mk1 Insignias suffers from hydraulic power steering system failures at a rate significantly higher than the fleet average. MOT data shows failure rates 34.4x higher than typical, indicating systemic issues with either the power steering pump, high-pressure hoses, or steering rack seals. The hydraulic system operates under high pressure and components can fail due to seal deterioration, pump wear, or hose degradation. This affects steering feel and requires immediate attention for safety.

    What to check: Check the power steering fluid reservoir level and condition - low fluid or dark, contaminated fluid indicates system problems. Look for fluid leaks under the car, particularly around the steering rack area behind the front wheels. Examine visible power steering hoses for signs of weeping, bulgin...

  9. Adaptive headlight failure

    Wear item A

    The adaptive front lighting (AFL) system on A generation models uses motors and sensors to adjust headlight beam direction based on steering input, vehicle speed, and cornering. The system components including stepper motors, control modules, and position sensors can fail over time, causing headlight warning messages and the lights to remain in a fixed position. This is primarily an electrical reliability issue rather than mechanical wear, though the motors can suffer from moisture ingress.

    What to check: Check the dashboard for any headlight warning symbols or AFL system messages. Examine the headlight units for any obvious moisture ingress or condensation inside the lens. Ask if the adaptive lighting function has been working correctly - lights should move when steering at low speeds.

  10. Front suspension wear

    Wear item A

    The front suspension on A generation Insignias uses MacPherson struts with lower control arms and anti-roll bar drop links. The suspension bushes, ball joints, and drop links are subject to wear from UK road conditions, particularly the lower arm bushes and drop link ball joints. This manifests as knocking noises over bumps, vague steering feel, and irregular tyre wear patterns. The suspension components are conventional in design but wear rates are typical for this vehicle class and weight.

    What to check: Examine the front tyres for uneven wear patterns - inside edge wear suggests suspension alignment issues, while cupping or irregular wear indicates worn shock absorbers or bushes. Look under the front of the car for any obvious signs of oil leakage from shock absorbers. Check for any visible dama...

What Insignias cost at dealers now

From 380 used Insignias we track on UK dealer websites.

Typical asking price
£6,728
Typical mileage
75,175 miles
Price change vs last month
-5.3%

Insignia MOT results

22.1%

of Insignia MOT tests end in a fail, from 796,212 tests.

Most common reasons for failing

  1. Emissions failureExhaust & Emissions
  2. Coil springs brokenBrakes
  3. Any part of the noise suppression system insecureExhaust & Emissions

Check the Insignia you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Insignia questions

Is the Vauxhall Insignia reliable?

22.1% of Insignia models fail their MOT based on 796,212 tests analysed. That’s about average for the class. There are 10 known problems to watch for, the most serious being egr valve failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Vauxhall Insignia?

The most serious known issues are egr valve failure, timing chain wear, timing chain issues. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Insignia has been written off or had insurance claims linked to these faults.

How do I check if a Vauxhall Insignia has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Vauxhall Insignia has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Insignia has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Vauxhall Insignia for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Vauxhall Insignia fail its MOT on?

The most common MOT failure on the Insignia is emissions failure. 22.1% of Insignia models fail overall, based on 796,212 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Insignia

Other Vauxhall car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.