Home/Car check/Subaru/Justy

Subaru Justy car check

Find out if a Justy has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
23.9%4k tests
Known problems
5across G3X
Full report
£7.49one-off, no subscription

Which Justy are you looking at?

Each Justy generation has its own weak spots. Here are the known problems.

  1. Brake pipe corrosion and failure

    Safety risk G3X

    Brake pipes on the Justy corrode at an exceptionally high rate, with MOT data showing failure rates 11.9 times higher than the national fleet average. The steel brake lines are prone to perforation from road salt and moisture, particularly where they run along the underside of the vehicle. This represents a critical safety defect as brake fluid loss leads to complete brake failure. The issue appears across all mileage ranges from 20,000 miles upward.

    What to check: Lie under the vehicle with a torch and examine all visible brake lines from the master cylinder to each wheel. Look for brown rust staining, wet spots, or crystalline deposits around pipe joints and along the pipe runs. Check the brake fluid reservoir level - low fluid may indicate an existing le...

  2. Suspension component corrosion and damage

    Wear item G3X

    Suspension components suffer severe corrosion and structural damage at rates 40.4 times higher than the national average. The problem affects control arms, anti-roll bar links, and mounting brackets, with corrosion accelerated by the vehicle's low ground clearance and exposure to road salt. Failed suspension components compromise handling, steering response, and tyre wear patterns. The issue appears as early as 20,000 miles and worsens progressively.

    What to check: Examine visible suspension components for rust staining, flaking metal, or obvious structural damage. Pay particular attention to lower control arm mounting points and anti-roll bar link connections. Look for corrosion around suspension mounting brackets where they attach to the body shell. Check...

  3. Suspension bush and joint wear

    Wear item G3X

    Suspension bushes and joints wear at 25.8 times the national fleet average, with the problem affecting control arm bushes, anti-roll bar bushes, and ball joints. The rubber compounds appear to deteriorate rapidly in UK conditions, leading to excessive play in suspension components. Worn bushes create knock and rattle over bumps and compromise vehicle handling and stability.

    What to check: Examine visible rubber bushes for cracking, splitting, or obvious deterioration. Look particularly at anti-roll bar bushes and control arm bushes. Check for excessive movement by attempting to move suspension components by hand - there should be minimal free play. Look for rust or corrosion aroun...

  4. CV joint boot deterioration

    Wear item G3X

    CV joint boots deteriorate at 6.0 times the national average, with failures concentrated at higher mileages. The rubber boots protecting the constant velocity joints split and tear, allowing grease to escape and contaminants to enter. Once compromised, the CV joint itself will fail within a few thousand miles due to lack of lubrication and ingress of dirt and water.

    What to check: Examine the CV joint boots at both ends of each driveshaft for splits, tears, or grease contamination around the boot. Look for fresh grease deposits on the inside of wheel rims or around the wheel arch area. Check that the metal clamps securing each boot are tight and properly positioned.

  5. Exhaust system corrosion

    Wear item G3X

    The exhaust system corrodes and fails at 4.1 times the national average, typically affecting the middle section and rear silencer. Short journeys and the vehicle's low ground clearance contribute to moisture retention and accelerated corrosion. Failed exhaust sections create excessive noise and may allow exhaust gases to enter the cabin.

    What to check: Examine the visible exhaust system from underneath for holes, rust perforation, or loose hanging sections. Check exhaust mounting brackets and rubber hangers for damage or deterioration. Look for white or black staining around joints which indicates gas leakage.

Justy MOT results

23.9%

of Justy MOT tests end in a fail, from 4,317 tests.

Most common reasons for failing

  1. Suspension component damaged or corrodedSuspension
  2. Anti-roll bar links wornSuspension
  3. Headlight faultLights & Electrics

Check the Justy you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Justy questions

Is the Subaru Justy reliable?

23.9% of Justy models fail their MOT based on 4,317 tests analysed. That’s about average for the class. There are 5 known problems to watch for, the most serious being brake pipe corrosion and failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Subaru Justy?

The most serious known issues are brake pipe corrosion and failure, suspension component corrosion and damage, suspension bush and joint wear. Our car check flags whether a specific Justy has been written off or had insurance claims linked to these faults.

How do I check if a Subaru Justy has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Subaru Justy has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Justy has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Subaru Justy for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Subaru Justy fail its MOT on?

The most common MOT failure on the Justy is suspension component damaged or corroded. 23.9% of Justy models fail overall, based on 4,317 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Justy

Other Subaru car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.