Home/Car check/Lexus/Is300

Lexus Is300 car check

Find out if a Is300 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
20.9%9k tests
Known problems
5across XE10
Full report
£7.49one-off, no subscription

Which Is300 are you looking at?

Each Is300 generation has its own weak spots. Here are the known problems.

  1. Subframe mounting point corrosion

    Safety risk XE10

    The rear subframe mounting points on XE10 IS300 models are vulnerable to corrosion where the subframe bolts attach to the body shell. This affects the prescribed areas within 30cm of suspension mounting points that carry structural loads. UK examples show significantly elevated failure rates at MOT due to weakened load-bearing structure around these critical mounting points. The corrosion typically starts from inside the body cavity and progresses outward, making early detection difficult without lifting the vehicle.

    What to check: Examine the rear wheel arches from inside the boot, looking for any rust staining or brown deposits on the carpet or trim panels that might indicate water ingress and internal corrosion. Check under the rear of the car with a torch if possible, looking at the points where the rear subframe bolts ...

  2. Suspension component corrosion

    Wear item XE10

    XE10 IS300 models show elevated MOT failure rates for suspension component corrosion, particularly affecting the rear suspension arms and subframe components. The combination of UK weather conditions and road salt causes accelerated corrosion of steel suspension components. This model shows failure rates nearly 7 times higher than the fleet average, indicating a particular vulnerability in the suspension design or material specification.

    What to check: Examine all four wheels for any unusual tyre wear patterns that might indicate suspension geometry problems caused by corroded or weakened components. Look under the car at the rear suspension arms and mounting points, checking for obvious rust, flaking metal, or structural damage. Check that all...

  3. Body shell structural corrosion

    Safety and MOT risk XE10

    XE10 IS300 models show significantly higher rates of structural body corrosion that reduces the rigidity of the vehicle assembly. This typically affects sill areas, floor pan sections, and other load-bearing body structure, particularly where water can collect or road salt accumulates.

    What to check: Examine the door sill areas along both sides of the car, looking for bubbling paint, rust staining, or obvious holes in the metal. Pay particular attention to the area behind the front wheels and in front of the rear wheels. Check inside the boot and under floor mats for any signs of rust breakth...

  4. Brake caliper binding

    Safety and MOT risk XE10

    XE10 IS300 models show elevated MOT failure rates for binding brakes, with failure rates 2.3 times higher than the fleet average. This typically affects the brake calipers, particularly the rear sliding calipers which are prone to seizing on their guide pins due to corrosion and brake fluid contamination. The issue is exacerbated by infrequent brake fluid changes and UK road conditions.

    What to check: Check all four wheel rims for excessive brake dust accumulation or heat staining, which could indicate a binding brake. Look for uneven brake dust patterns between left and right wheels. Examine the brake discs through the wheel spokes for any obvious scoring, heat discolouration, or uneven wear ...

  5. Shock absorber failure

    Wear item XE10

    XE10 IS300 models show MOT failure rates for shock absorber damage and leakage at twice the fleet average. This typically manifests as oil leakage from the shock absorber seals or physical damage to the shock absorber body. The sporty suspension setup and relatively firm damping on this model may contribute to accelerated wear of the internal seals and components.

    What to check: Examine all four shock absorbers for obvious oil leakage, looking for wet patches or oil residue on the shock absorber body and surrounding areas. Check for any physical damage to the shock absorber body, mounting points, or protective dust covers. Push down firmly on each corner of the car and r...

Is300 MOT results

20.9%

of Is300 MOT tests end in a fail, from 9,022 tests.

Most common reasons for failing

  1. Suspension pin, bush or joint wornSuspension
  2. Power steering faultSteering
  3. Subframe bushes or mounts wornSuspension

Check the Is300 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Is300 questions

Is the Lexus Is300 reliable?

20.9% of Is300 models fail their MOT based on 9,022 tests analysed. That’s about average for the class. There are 5 known problems to watch for, the most serious being subframe mounting point corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Lexus Is300?

The most serious known issues are subframe mounting point corrosion, suspension component corrosion, body shell structural corrosion. Our car check flags whether a specific Is300 has been written off or had insurance claims linked to these faults.

How do I check if a Lexus Is300 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Lexus Is300 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Is300 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Lexus Is300 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Lexus Is300 fail its MOT on?

The most common MOT failure on the Is300 is suspension pin, bush or joint worn. 20.9% of Is300 models fail overall, based on 9,022 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Is300

Other Lexus car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.