Home/Car check/Isuzu/D Max

Isuzu D Max car check

Find out if a D Max has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£24,940106 at dealers
MOT failure rate
20.7%69k tests
Known problems
5across Gen1 to Gen3
Full report
£7.49one-off, no subscription

Which D Max are you looking at?

Each D Max generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Excessive suspension bush and joint wear

    Wear item Gen1, Gen2, Gen3

    The D-Max shows exceptionally high rates of suspension component wear, particularly bushes, ball joints and anti-roll bar links. MOT data shows this model fails at up to 85.8 times the fleet average for suspension bush and joint wear across all mileage bands. This is attributed to the commercial vehicle chassis design and heavy-duty use patterns, where suspension components face higher loads than typical passenger cars. The problem affects both front and rear suspension equally and is progressive rather than sudden failure.

    What to check: Walk around the vehicle and check for uneven tyre wear patterns - cupping on the inside or outside edges indicates worn suspension bushes or ball joints. Look under the front and rear of the vehicle for any obvious oil leakage from shock absorbers, which appears as dark wet streaks down the shock...

  2. Wheel bearing wear

    Wear item Gen1, Gen2, Gen3

    D-Max vehicles show wheel bearing failure at 55.8 times the national fleet average, with failures occurring across all mileage bands including unusually early failures at 20,000-40,000 miles. This is likely due to the commercial vehicle specification and heavier loading compared to passenger cars. Both front and rear bearings are affected, with the problem being progressive - bearings develop play gradually before eventual failure.

    What to check: Jack up each wheel individually and grasp the tyre at 12 o'clock and 6 o'clock positions, then rock it back and forth - any movement or clicking sounds indicate bearing wear. Repeat the test holding the tyre at 3 o'clock and 9 o'clock positions to check for lateral play. Spin each wheel by hand -...

  3. Towbar component failure

    Safety and MOT risk Gen1, Gen2

    D-Max vehicles with towbars show failure rates 72.8 times higher than the fleet average for towbar component damage, corrosion, or fracture. This affects the 2.5L diesel variants most severely and is likely related to the heavy-duty towing use these vehicles typically see. The failures include towbar mounting point corrosion, electrical socket damage, and mechanical component fracture due to repeated loading cycles.

    What to check: Inspect the towbar mounting points under the rear of the vehicle for any signs of corrosion, cracking, or movement in the chassis mounting areas - these should be solid with no rust breakthrough. Check the towbar ball and neck assembly for any visible cracks, distortion, or excessive wear pattern...

  4. Transmission component wear

    Wear item Gen1, Gen2, Gen3

    MOT data reveals D-Max vehicles fail at This typically manifests as CV joint failure, propshaft universal joint wear, or transfer case components on 4WD variants. The commercial vehicle duty cycle and potential for overloading contributes to accelerated wear of these drivetrain components compared to passenger cars.

    What to check: Visually inspect the CV joint boots (rubber covers) on both sides of the front axle - split or damaged boots allow contamination and lead to joint failure. Look under the vehicle for any obvious leakage from the gearbox, transfer case, or differential - dark oil stains indicate seal failure. Chec...

  5. Shock absorber bush wear

    Wear item Gen1, Gen2, Gen3

    MOT data shows D-Max vehicles fail at 29 times the fleet average for shock absorber bush wear, with failures most common at higher mileages but occurring across all age ranges. The bushes that mount the shock absorbers to the chassis and suspension arms deteriorate due to the commercial vehicle's heavier duty cycle and loading. This issue is separate from shock absorber internal failure and specifically affects the rubber mounting components.

    What to check: Visually inspect the top and bottom mounting points of each shock absorber for cracked, perished, or displaced rubber bushes - they should be intact and properly seated. Look for any metal-to-metal contact where bushes have completely failed, which will show as bright metal wear marks. Check for ...

What D Max cost at dealers now

From 106 used D Max we track on UK dealer websites.

Typical asking price
£24,940
Typical mileage
41,206 miles
Price change vs last month
-31.5%

D Max MOT results

20.7%

of D Max MOT tests end in a fail, from 68,862 tests.

Most common reasons for failing

  1. Electrical wiring faultLights & Electrics
  2. Towbar faultBodywork
  3. Coil springs brokenSuspension

Check the D Max you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

D Max questions

Is the Isuzu D Max reliable?

20.7% of D Max models fail their MOT based on 68,862 tests analysed. That’s about average for the class. There are 5 known problems to watch for, the most serious being excessive suspension bush and joint wear. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Isuzu D Max?

The most serious known issues are excessive suspension bush and joint wear, wheel bearing wear, towbar component failure. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific D Max has been written off or had insurance claims linked to these faults.

How do I check if a Isuzu D Max has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Isuzu D Max has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N D Max has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Isuzu D Max for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Isuzu D Max fail its MOT on?

The most common MOT failure on the D Max is electrical wiring fault. 20.7% of D Max models fail overall, based on 68,862 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the D Max

Other Isuzu car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.