Home/Car check/Ford/Ranger

Ford Ranger car check

Find out if a Ranger has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£24,705945 at dealers
MOT failure rate
23.8%406k tests
Known problems
7across Gen1 to Gen4
Full report
£7.49one-off, no subscription

Which Ranger are you looking at?

Each Ranger generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Chassis mounting point corrosion

    Safety risk Gen1, Gen2

    The Ranger's chassis suffers from severe corrosion at suspension and body mounting points, particularly where the leaf spring brackets attach to the main rails. Ford used insufficient corrosion protection on these critical structural points. MOT data shows this model fails at 199 times the national fleet average for mounting point corrosion. This is a structural integrity issue that can render the vehicle unsafe to drive and uneconomical to repair.

    What to check: Inspect the rear leaf spring mounting brackets where they attach to the chassis rails - look for rust perforation, flaking metal, or visible holes through the mounting points. Check the front suspension mounting points on the chassis rails for similar corrosion patterns. Look underneath at the ch...

  2. Leaf spring failure

    Safety risk Gen1, Gen2, Gen3

    The Ranger's rear leaf springs are prone to fracturing, particularly the main load-bearing leaf. This affects all generations up to 2022 and shows in MOT data as 181 times the fleet average failure rate. The springs can fracture suddenly under load, causing immediate loss of vehicle control and potential axle displacement. This is exacerbated by corrosion of the spring mounting points and inadequate spring steel specification for the vehicle's payload rating.

    What to check: Visually inspect each leaf spring for visible cracks, particularly at the mounting points and where individual leaves contact each other. Look for rust staining or corrosion on the spring steel that could indicate metal fatigue. Check for broken spring leaves that may have shifted position or are...

  3. Steering rack excessive play

    Wear item Gen1, Gen2

    The Ranger's steering rack develops excessive free play, showing 247 times the fleet average failure rate in MOT data. This affects primarily the earlier generations and manifests as wandering steering, poor straight-line stability, and increased steering effort. The rack pinion wears prematurely, and internal seals fail, leading to hydraulic fluid contamination of the rack mechanism.

    What to check: With the engine off and wheels straight ahead, attempt to turn the steering wheel left and right - excessive movement before the wheels begin to turn indicates rack wear. Check the power steering fluid reservoir for contamination, foaming, or low level. Inspect under the vehicle for power steerin...

  4. Turbo failure

    Engine damage risk Gen1, Gen2, Gen3

    Duratorq diesel engines suffer from turbocharger failure due to oil starvation, carbon buildup on the variable geometry mechanism, and bearing wear. The variable geometry turbo (VGT) system is particularly prone to sticking vanes caused by carbon deposits and inadequate oil change intervals. This affects all Duratorq variants and typically manifests as loss of boost pressure, reduced power output, and excessive exhaust smoke.

    What to check: Check engine oil level and condition on the dipstick - contaminated or low oil accelerates turbo bearing wear. Visually inspect the turbo unit for oil leaks around the housing joints and waste-gate actuator. Check for excessive oil consumption history in service records. Look for blue or black sm...

  5. Injector failure

    Wear item Gen1, Gen2, Gen3

    Common rail diesel injectors on Duratorq engines are prone to failure due to fuel contamination, carbon buildup, and wear of internal sealing components. The high-pressure injection system operates at up to 2,000 bar, making injectors sensitive to fuel quality and contamination. Failed injectors cause rough running, excessive smoke, poor fuel economy, and can damage other injection system components if left untreated.

    What to check: Check the fuel filter change history - contaminated fuel accelerates injector wear. Look for diesel fuel leaks around the injector areas or fuel rail. Check for excessive diesel smell that might indicate fuel system leaks. Review any diagnostic trouble codes stored in the engine management system.

  6. Auto gearbox issues

    Wear item Gen1, Gen2, Gen3, Gen4

    The Ranger's automatic transmission suffers from various issues including harsh shifting, gear selection problems, and internal component wear. This affects the 5-speed and 6-speed automatic transmissions used across all generations. Common problems include valve body wear, solenoid failure, and clutch pack degradation. NHTSA data shows significant transmission-related complaints with gear shifting issues being the primary concern.

    What to check: Check the transmission fluid level and condition using the dipstick (engine running, transmission warm) - burnt smell or dark coloration indicates internal damage. Look under the vehicle for transmission fluid leaks around the pan, cooler lines, or torque converter area. Review service history fo...

  7. Suspension bush wear

    Wear item Gen1, Gen2, Gen3

    The Ranger shows 71 times the fleet average failure rate for suspension bush wear, affecting multiple bush locations including lower arm bushes, anti-roll bar links, and shock absorber mounts. The commercial vehicle design places higher loads on suspension components than typical passenger cars, accelerating wear of rubber bushes and creating characteristic handling issues and MOT failures.

    What to check: Visually inspect rubber bushes in the front lower arms for cracking, splitting, or separation from the metal sleeves. Check anti-roll bar drop links for excessive movement or damaged rubber boots. Look for oil staining around shock absorber mounts that might indicate bush deterioration. Examine r...

What Rangers cost at dealers now

From 945 used Rangers we track on UK dealer websites.

Typical asking price
£24,705
Typical mileage
46,783 miles
Price change vs last month
-3.1%

Ranger MOT results

23.8%

of Ranger MOT tests end in a fail, from 406,212 tests.

Most common reasons for failing

  1. Fixings missing or insecureBodywork
  2. ABS faultSteering
  3. Towbar faultBodywork

Check the Ranger you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Ranger questions

Is the Ford Ranger reliable?

23.8% of Ranger models fail their MOT based on 406,212 tests analysed. That’s about average for the class. There are 7 known problems to watch for, the most serious being chassis mounting point corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Ford Ranger?

The most serious known issues are chassis mounting point corrosion, leaf spring failure, steering rack excessive play. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Ranger has been written off or had insurance claims linked to these faults.

How do I check if a Ford Ranger has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Ford Ranger has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Ranger has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Ford Ranger for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Ford Ranger fail its MOT on?

The most common MOT failure on the Ranger is fixings missing or insecure. 23.8% of Ranger models fail overall, based on 406,212 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Ranger

Other Ford car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.