Home/Car check/Ford/Ka

Ford Ka car check

Find out if a Ford Ka has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£3,331172 at dealers
MOT failure rate
29.1%1.9m tests
Known problems
5across RB to Ka+
Full report
£7.49one-off, no subscription

Which Ka are you looking at?

Each Ka generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Subframe and suspension mounting corrosion

    Safety risk RB, RU8

    The Ka suffers from severe corrosion around subframe mounting points and suspension attachment areas. MOT data shows this model fails at up to 266 times the national average for suspension component corrosion and structural weakening in prescribed areas. The thin steel construction and inadequate factory rust protection cause mounting points to deteriorate rapidly, particularly on the rear beam axle mounting area and front subframe attachment points. This is a safety-critical structural failure that can affect vehicle control.

    What to check: Inspect the rear of the car where the rear axle beam meets the body structure. Look for brown rust staining, flaking metal, or visible holes in the mounting area. Check the front subframe mounting points visible from underneath - look for rust bloom or structural cracking around the mounting bolt...

  2. Body structural corrosion at mounting points

    Safety and MOT risk RB, RU8

    The Ka body structure suffers from widespread corrosion at critical mounting points, with MOT data showing failure rates up to 172 times the national average. The problem affects door hinges, seat belt mounting points, and other structural attachment areas. This is distinct from subframe issues but equally serious for vehicle integrity. The lightweight construction and poor corrosion resistance of the base metal make this a progressive issue that worsens rapidly once started.

    What to check: Check all door hinges for rust staining or visible corrosion - open and close each door to feel for binding or excessive play. Inspect seat belt mounting points for rust or structural cracking around the bolt holes. Look at the door frames and pillars for rust bloom or perforation, particularly a...

  3. Power steering pipe corrosion

    Wear item RB

    First-generation Ka models suffer from power steering pipe corrosion at rates 150 times higher than the national fleet average. The steel high-pressure lines are inadequately protected against corrosion and develop pinhole leaks or complete failure. This primarily affects the feed line from the power steering pump to the rack. Loss of power steering fluid leads to heavy steering effort and potential pump damage if driven with low fluid levels.

    What to check: Check the power steering fluid reservoir - it should be clear and at the maximum mark. Dark, contaminated, or low fluid indicates system problems. Inspect the engine bay for red or amber fluid staining around the power steering pump and high-pressure lines. Look underneath the car for power steer...

  4. Brake hose deterioration

    Safety and MOT risk RB

    First-generation Ka models show brake hose failures at 81 times the national fleet average. The rubber brake hoses deteriorate internally and externally, causing swelling, cracking, or complete failure. This is a safety-critical issue as brake hose failure can lead to complete loss of braking on the affected circuit. The front brake hoses are particularly vulnerable due to their exposure to heat from the brake discs and road contaminants.

    What to check: Inspect all visible brake hoses for external cracking, swelling, or obvious deterioration of the rubber. Check around each brake hose connection point for brake fluid leakage or staining. Look for any brake hoses that appear swollen or have a 'pregnant' appearance which indicates internal deterio...

  5. Sill corrosion

    Safety and MOT risk RB, RU8

    Ka models suffer from progressive sill corrosion that starts from the inside and works outward. The door frame drainage is inadequate, allowing water to collect in the sill structure. This creates an environment for accelerated corrosion that often goes unnoticed until perforation appears. Sill corrosion is a common MOT failure point and can compromise the structural integrity of the vehicle, particularly important for side-impact protection.

    What to check: Examine the lower door frames and sill covers for rust staining, bubbling paint, or visible holes. Press gently on the plastic sill covers - they should feel solid underneath, not soft or spongy. Check the door shut areas for rust or corrosion, particularly at the bottom of the door frame. Look f...

What Kas cost at dealers now

From 172 used Kas we track on UK dealer websites.

Typical asking price
£3,331
Typical mileage
57,959 miles
Price change vs last month
+5.2%

Ka MOT results

29.1%

of Ka MOT tests end in a fail, from 1,856,899 tests.

Most common reasons for failing

  1. ABS faultBrakes
  2. Body, cab or chassis corroded at mounting point...Bodywork
  3. Subframe bushes or mounts wornSuspension

Check the Ka you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Ka questions

Is the Ford Ka reliable?

29.1% of Ka models fail their MOT based on 1,856,899 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being subframe and suspension mounting corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Ford Ka?

The most serious known issues are subframe and suspension mounting corrosion, body structural corrosion at mounting points, power steering pipe corrosion. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Ka has been written off or had insurance claims linked to these faults.

How do I check if a Ford Ka has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Ford Ka has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Ka has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Ford Ka for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Ford Ka fail its MOT on?

The most common MOT failure on the Ka is abs fault. 29.1% of Ka models fail overall, based on 1,856,899 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Ka

Other Ford car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.