Home/Car check/Ford/Fusion

Ford Fusion car check

Find out if a Fusion has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£2,59227 at dealers
MOT failure rate
23.4%467k tests
Known problems
5across MK1
Full report
£7.49one-off, no subscription

Which Fusion are you looking at?

Each Fusion generation has its own weak spots. Here are the known problems.

  1. Brake pipe corrosion and failure

    Safety risk MK1

    The Fusion shows extremely high brake pipe failure rates, with MOT data indicating failures at 26 times the national fleet average. The brake pipes are prone to corrosion, particularly where they run under the vehicle and near suspension mounting points. Both the steel pipes and their connections can fail, leading to brake fluid loss and potential brake system failure. This affects all engine variants and becomes increasingly likely with age.

    What to check: Check the brake fluid reservoir level - it should be between the minimum and maximum marks and the fluid should be clear, not dark or contaminated. Look under the car for any brake fluid stains or wet patches, particularly along the brake pipe routes from front to rear. Visually inspect all acces...

  2. Power steering fluid loss and pump failure

    Wear item MK1

    The Fusion suffers from widespread power steering system failures affecting the hydraulic pump, fluid reservoir, and connecting pipes. MOT data shows this model fails power steering checks at 49.8 times the national fleet average, with both low fluid levels and damaged pipes being persistent issues. The power steering pump can fail internally, causing fluid contamination and complete loss of assistance. This is compounded by poor pipe routing that leads to corrosion and damage over the vehicle's lifespan.

    What to check: Check the power steering fluid reservoir (located near the brake fluid reservoir) - fluid should be clear amber or red, not black or contaminated with metal particles. Look under the car for pink or red fluid stains indicating hydraulic leaks, particularly around the steering rack area and along ...

  3. Diesel emissions system failure

    Wear item MK1

    The issues stem from DPF (Diesel Particulate Filter) blockage, EGR valve carbon build-up, and fuel system contamination. Short urban journeys prevent the DPF from reaching the temperatures needed for regeneration, causing progressive blockage and excessive smoke production.

    What to check: Check for black sooty deposits around the exhaust tailpipe indicating incomplete combustion or DPF problems. Ask about recent driving patterns - cars used mainly for short urban trips are most likely to have DPF issues. Request service history showing evidence of DPF regeneration cycles or cleani...

  4. Throttle body failure and sticking

    Engine damage risk MK1

    NHTSA data shows 537 complaints about throttle body failures on the Fusion, with symptoms including sudden loss of power, rough idling, and unintended acceleration events. The electronic throttle body can stick or fail due to carbon build-up on the throttle plate or internal motor failure. This affects petrol engines and can cause dangerous driving situations when the throttle becomes unresponsive or sticks open.

    What to check: Check for any stored diagnostic trouble codes using an OBD reader - throttle body faults typically generate P0120-P0124 codes relating to throttle position sensors. Visually inspect the throttle body (located between the air filter and intake manifold) for carbon deposits around the throttle plat...

  5. Suspension joint dust cover deterioration

    Wear item MK1

    The Fusion has documented issues with suspension joint dust covers (CV joint boots and ball joint gaiters) that fail at much higher rates than typical for the vehicle class. MOT data shows failures at up to 25.7 times the fleet average, affecting all engine variants from very low mileages. The rubber boots split or tear, allowing dirt and water to contaminate the joint internals, leading to accelerated wear and eventual joint failure.

    What to check: Inspect all visible CV joint boots at the wheel end of each driveshaft - look for splits, tears, or grease leakage around the rubber covers. Check the inner CV joint boots where the driveshafts connect to the gearbox - these are harder to see but look for grease splatter on nearby components. Exa...

What Fusions cost at dealers now

From 27 used Fusions we track on UK dealer websites.

Typical asking price
£2,592
Typical mileage
74,164 miles
Price change vs last month
+30.4%

Fusion MOT results

23.4%

of Fusion MOT tests end in a fail, from 466,771 tests.

Most common reasons for failing

  1. Emissions failureExhaust & Emissions
  2. Brake pipes corrodedBrakes
  3. Power steering faultSteering

Check the Fusion you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Fusion questions

Is the Ford Fusion reliable?

23.4% of Fusion models fail their MOT based on 466,771 tests analysed. That’s about average for the class. There are 5 known problems to watch for, the most serious being brake pipe corrosion and failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Ford Fusion?

The most serious known issues are brake pipe corrosion and failure, power steering fluid loss and pump failure, diesel emissions system failure. Our car check flags whether a specific Fusion has been written off or had insurance claims linked to these faults.

How do I check if a Ford Fusion has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Ford Fusion has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Fusion has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Ford Fusion for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Ford Fusion fail its MOT on?

The most common MOT failure on the Fusion is emissions failure. 23.4% of Fusion models fail overall, based on 466,771 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Fusion

Other Ford car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.