Home/Car check/Daimler/V8

Daimler V8 car check

Find out if a Daimler V8 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
19.6%873 tests
Known problems
5across V8_1960-2013
Full report
£7.49one-off, no subscription

Which V8 are you looking at?

Each V8 generation has its own weak spots. Here are the known problems.

  1. Structural corrosion seriously reducing rigidity

    Safety risk V8_1960-2013

    MOT data shows this model fails at 14.7 times the national fleet average for vehicle structure corrosion that seriously reduces rigidity. This typically affects the subframe mounting points and structural components within 30cm of suspension attachment points. The issue is worsening in the test population, indicating progressive deterioration across the fleet. Given the age of most examples, structural steel has been exposed to decades of road salt and moisture.

    What to check: Examine the area around all four wheels where the suspension components attach to the body. Look for brown rust staining, flaky metal, or holes in the metalwork. Check underneath the car at the front and rear subframe mounting points for significant corrosion or previous welding repairs. Look for...

  2. Excessive wheel bearing play

    Safety risk V8_1960-2013

    MOT data shows this model fails at 14.5 times the fleet average for wheel bearing excessive play, with 105 failures recorded across the mileage bands where the problem peaks. This affects both 60-80k and 80-100k mile ranges and appears consistently across all test years. Wheel bearing failure on older luxury cars is often accelerated by infrequent use and exposure to moisture over decades.

    What to check: Jack up each corner of the car and check for wheel movement by grasping the tyre at 3 o'clock and 9 o'clock positions, then pushing and pulling. Any noticeable movement indicates bearing wear. Repeat the test holding the wheel at 12 o'clock and 6 o'clock positions. Spin each wheel by hand and lis...

  3. Subframe mounting point corrosion

    Safety risk V8_1960-2013

    This is a worsening trend indicating progressive deterioration across the surviving fleet. The prescribed area around mounting points is critical for vehicle structural integrity and must meet specific strength requirements for MOT pass.

    What to check: Inspect all visible subframe mounting points for corrosion, cracks, or previous repair welding. Look particularly at the front subframe where it bolts to the main chassis rails. Check for rust staining or flaky metal around rear suspension mounting points. Examine any visible chassis rails or str...

  4. Flexible brake hose deterioration

    Safety risk V8_1960-2013

    MOT data shows this model fails at 8.8 times the fleet average for flexible brake hoses that are excessively damaged, deteriorated, chafed, twisted or stretched. Given the age of most examples, original rubber brake hoses have exceeded their design life and are subject to cracking, bulging, and internal deterioration that can cause brake failure.

    What to check: Inspect all visible flexible brake hoses at each wheel for cracking, bulging, or chafing against suspension components. Check where hoses connect to brake calipers and look for fluid weepage or corrosion around the fittings. Examine hoses for any twisting or stretching that could indicate previou...

  5. Brake pipe corrosion

    Safety risk V8_1960-2013

    MOT data shows this model fails at 2.5 times the fleet average for brake pipe damage or excessive corrosion, with a worsening trend indicating progressive deterioration across the fleet. Steel brake pipes on cars of this age are particularly susceptible to corrosion where they pass through the engine bay and along the underside of the vehicle.

    What to check: Follow the brake pipes from the master cylinder to each wheel, looking for brown rust staining, pitting, or actual holes in the metal pipes. Pay particular attention to areas where pipes pass close to the exhaust system or are exposed to road spray. Check pipe joints and unions for corrosion or w...

V8 MOT results

19.6%

of V8 MOT tests end in a fail, from 873 tests.

Most common reasons for failing

  1. Body, cab or chassis corroded at a mounting pointBodywork
  2. Structural corrosionBodywork
  3. ABS faultSuspension

Check the V8 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

V8 questions

Is the Daimler V8 reliable?

19.6% of V8 models fail their MOT based on 873 tests analysed. That’s about average for the class. There are 5 known problems to watch for, the most serious being structural corrosion seriously reducing rigidity. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Daimler V8?

The most serious known issues are structural corrosion seriously reducing rigidity, excessive wheel bearing play, subframe mounting point corrosion. Our car check flags whether a specific V8 has been written off or had insurance claims linked to these faults.

How do I check if a Daimler V8 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Daimler V8 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N V8 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Daimler V8 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Daimler V8 fail its MOT on?

The most common MOT failure on the V8 is body, cab or chassis corroded at a mounting point. 19.6% of V8 models fail overall, based on 873 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the V8

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.