Home/Car check/Bentley/Arnage

Bentley Arnage car check

Find out if a Arnage has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£27,75710 at dealers
MOT failure rate
12.8%8k tests
Known problems
5across Mark IV to Final Series
Full report
£7.49one-off, no subscription

Which Arnage are you looking at?

Each Arnage generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Brake pipe corrosion

    Safety risk Mark IV, Final Series

    Brake pipe corrosion occurs at 2.9 times the national fleet average, with the trend worsening over recent MOT test cycles. Steel brake pipes are vulnerable to corrosion from road salt and moisture, particularly on the rear axle and underbody runs. On a vehicle weighing over 2.5 tonnes, brake system integrity is critical for safe stopping distances. Corroded brake pipes can fail suddenly, causing complete brake circuit failure.

    What to check: Inspect all visible brake pipes along their entire length, paying particular attention to rear axle pipes and connection points. Look for rust, pitting, or green corrosion deposits on steel pipes. Check for brake fluid stains or wetness around pipe connections and joints. Examine brake fluid rese...

  2. Spring component failure

    Safety risk Mark IV, Final Series

    Coil spring fractures occur at 5.2 times the fleet average on 6.75-litre V8 variants, with failures documented as early as 20,000 miles. The substantial weight of the Arnage, combined with its sophisticated multi-link suspension design, places high stresses on spring components. Spring failure can cause sudden loss of vehicle height, tyre damage from contact with wheel arches, and potentially dangerous handling characteristics.

    What to check: Inspect the vehicle stance for any obvious sagging or uneven height between corners. Look visually at all four coil springs for cracks, breaks, or separation - this requires viewing from multiple angles. Check for contact marks on tyre sidewalls where they may have rubbed against wheel arch liner...

  3. Suspension joint dust cover deterioration

    Wear item Mark IV, Final Series

    Ball joint and suspension component dust covers fail at exceptionally high rates on the Arnage, with MOT data showing failure rates up to 45.6 times the national fleet average. These rubber boots protect critical suspension joints from dirt and moisture ingress. When they split or detach, the underlying ball joints and bushes wear rapidly, leading to expensive suspension rebuilds and potential safety issues through loss of steering precision.

    What to check: Inspect all visible suspension joints for split, cracked, or missing rubber dust covers. Check front lower wishbone ball joints, track rod ends, and anti-roll bar drop link boots. Look for grease weeping from joints where dust covers have failed - this appears as black or brown grease around the ...

  4. Shock absorber bush wear

    Wear item Mark IV, Final Series

    Shock absorber mounting bushes deteriorate at 13.4 times the national fleet average, particularly affecting higher-mileage Arnage models. These rubber bushes isolate the shock absorbers from the chassis and control vibration transmission. The Arnage's substantial weight and sophisticated suspension geometry places high loads on these components, causing premature failure that affects ride quality and handling precision.

    What to check: Inspect shock absorber top mounts for visible cracking, splitting, or separation of rubber bushes. Check for oil staining around shock absorber bodies indicating fluid leakage. Look for uneven tyre wear patterns that may indicate suspension geometry problems. Push down firmly on each corner of th...

  5. Power steering system malfunction

    Wear item Mark IV, Final Series

    Power steering failures occur at 16.9 times the fleet average on 6.75-litre V8 variants, typically manifesting as fluid leaks or pump malfunctions around 60,000-80,000 miles. The hydraulic power steering system on these heavy luxury cars operates under high loads, particularly during parking manoeuvres. Pump failure or significant fluid leakage makes the steering extremely heavy and potentially dangerous in emergency situations.

    What to check: Check power steering fluid reservoir level and colour - fluid should be clear red, not black or contaminated. Inspect visible steering lines and connections for fluid leakage, particularly around the pump and steering rack. Look for power steering fluid stains on the ground where the car has been...

What Arnages cost at dealers now

From 10 used Arnages we track on UK dealer websites.

Typical asking price
£27,757
Typical mileage
54,848 miles
Price change vs last month
+10.1%

Arnage MOT results

12.8%

of Arnage MOT tests end in a fail, from 7,816 tests.

Most common reasons for failing

  1. Fluid leakExhaust & Emissions
  2. Anti-roll bar links wornSuspension
  3. Power steering faultSteering

Check the Arnage you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Arnage questions

Is the Bentley Arnage reliable?

12.8% of Arnage models fail their MOT based on 7,816 tests analysed. That’s better than average for the class. There are 5 known problems to watch for, the most serious being brake pipe corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Bentley Arnage?

The most serious known issues are brake pipe corrosion, spring component failure, suspension joint dust cover deterioration. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Arnage has been written off or had insurance claims linked to these faults.

How do I check if a Bentley Arnage has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49 it’s the cheapest way to avoid a car that isn’t legally for sale.

How do I check if a Bentley Arnage has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Arnage has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Bentley Arnage for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

Is a Bentley Arnage HPI check worth it?

HPI is one brand of car check. Our check uses the same Experian data covering finance, stolen, write-off and keeper history, plus MOT analysis and known Arnage faults that HPI doesn’t include. At £7.49 it’s typically less than half the price of an HPI check.

What does a Bentley Arnage fail its MOT on?

The most common MOT failure on the Arnage is fluid leak. 12.8% of Arnage models fail overall, based on 7,816 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Arnage

Other Bentley car checks

Bentley Continental9.2% MOT failure rate Bentley Turbo5 known problems

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.